ICODE

View as:
  • Pepper C1 Module FCC Approved RFID Module

    £23.95

    Our newest version of the Pepper C1 Module FCC has modular approval from the FCC for use in equipment supplied and fitted in the USA.

    The Pepper C1 Module is a very powerful, wireless (Wi-Fi, Bluetooth: SPP and BLE) and low cost full RFID/NFC read/write device with UART interface that can operate in both host connected and stand alone mode. Supports MIFARE® Classic® in 1K, 4K memory, ICODE, MIFARE Ultralight®, MIFARE DESFire® EV1/EV2, MIFARE Plus®.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: Digi-Key – [click here]:

    Add to basket
  • Pepper C1 Module

    £22.95

    The Pepper C1 Module is a very powerful, wireless (Wi-Fi, Bluetooth: SPP and BLE) and low cost full RFID/NFC read/write device with UART interface that can operate in both host connected and stand alone mode. Supports MIFARE® Classic® in 1K, 4K memory, ICODE, MIFARE Ultralight®, MIFARE DESFire® EV1/EV2, MIFARE Plus®.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: RS Components – [click here] or Digi-Key – [click here]:

    Add to basket
  • RFID NFC MicroRWD MICODE

    £35.70

    The MicroRWD MICODE module is a complete “contactless” read / write solution for 13.56 MHz MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®, ProX®, Smart MX®, JCOP), ICODE® SLI and ISO14443B (Calypso Rev2) cards and tags. DESFire®, MIFARE Plus® and ISO14443B Calypso cards are supported for serial number acquisition only.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • RFID NFC OEM MICODE RS232 TURBO

    £37.75

    The OEM MICODE RS232 TURBO reader is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI, DESFire® MIFARE Plus® cards and tags. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • RFID NFC OEM MICODE USB TURBO

    £37.95

    The OEM MICODE USB TURBO reader is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI, DESFire® MIFARE Plus® cards and tags. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • RFID NFC OEM-MICODE-RS232

    £37.85

    The OEM-MICODE-RS232 Reader Board is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI cards and tags. DESFire® and Mifare Plus® cards are supported for serial number acquisition only. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • RWD MICODE TURBO

    £33.95

    The RWD MICODE TURBO reader is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI, DESFire® MIFARE Plus® cards and tags.

    Add to basket
  • Pepper C1 Module Baseboard

    £23.50

    The Pepper C1 module baseboard is a development and evaluation board for the Pepper C1 Module product with wireless connectivity via Wi-Fi 802.11b/g/n and Bluetooth SPP profile. Thanks to this, the customer receives free lifetime Over-the-Air updates, and of course the communication protocol can be used over TCP instead of traditional UART/USB interface. Combining these features with standalone mode provides a ready to use device in many applications “straight out of the box.” In standalone mode, the module can also send a tag UID over MQTT or WebSockets, and so can easily be integrated with IoT systems.

    The Pepper C1 module NOT included.

    Price breaks

    Amount Discount
    100+ 3%
    250+ 5%
    500+ 7%
    1000+ Contact us
    Add to basket

Showing all 8 results