RFID NFC OEM-MICODE-USB

A Complete RFID read/write device supporting NFC transponders (NTAG2 fully supported, NTAG4 serial number read only). Also fully supports MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight. Supports DESFire serial number read only. Connected and powered by USB. Available also in white or black case with rubber feet for desktop use. (Please email sales@eccel.co.uk for pricing and to order cased version).

Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

Availability:

73 in stock

Compare
The OEM-MICODE-USB Reader Board is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI cards and tags. DESFire® and Mifare Plus® cards are supported for serial number acquisition only. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).

The OEM boards are based on the proven RWD-MICODE (MIFARE®, ICODE®) module design with components laid out inside a PCB track antenna and they function in exactly the same way as the module with an antenna fitted. The design incorporates power supply filtering to ensure optimum performance, antenna-trimming capacitor to adjust tuning for different environments and LEDs for visual indication of card acceptance. The J2 connector also allows the OEM-MICODE board to be reprogrammed with custom firmware.

The OEM-NFC-MIFARE-RS232 Reader boards are complete, embedded “Plug-and-Go” RFID read/writers with on-board PCB track antenna, LEDs and RS232 or USB host interfaces. The OEM Reader boards just need a 5 V supply to be fully featured RFID systems (the USB interface version is powered directly from the USB bus).

The OEM-MIFARE board fully supports MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and contactless read/write to MIFARE ProX® and SmartMX® cards and tags. DESFire® and MIFARE Plus® cards are supported for serial number acquisition only.

The OEM-MICODE-USB (MIFARE® / ICODE® / ISO14443B) board fully supports MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® (as above), ICODE SLI® and ISO14443B Calypso cards and tags. DESFire®, MIFARE Plus® and ISO14443B Calypso cards are supported for serial number acquisition only.

The OEM-NFC board fully supports NFC Type 2 and 4 cards and tags (including ISO14443A MIFARE®, MIFARE Ultralight®, NTAG2xx® etc). DESFire® and MIFARE Plus® cards are supported for serial number acquisition only.

PARAMETERS

Frequency

HF

Interface

USB

RFID Tag Standard

ICODE SLI®, MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®

Supply voltage

5V

Firmware

090811

DATASHEET

pdf iconDATASHEET

 

DOWNLOADS

SOFTWARE & TOOLS:

zip icon 1Micro RWD MFIC 1.1

CE DECLARATION:

pdf icon 2CE

You may also like…