RFID NFC B1 Current
-
RFID RWD QT ESD (Industrial)
£26.95Add to basketIndustrial version of 125 kHz RFID reader module supporting several transponder/tag types. NXP Hitag1, Hitag S256, Hitag S2048, Hitag2, EM4001 / EM4102 and Microchip MCRF200/123 tag types.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
RFID NFC B1 EA USB (External Antenna)
£24.60Add to basketA low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K and MIFARE Classic® 4K, NTAG2xx®, Ultralight. Based on our RFID-B1 with additional socket for an external antenna, USB interface (FTDI virtual COM port, micro USB connector), powered by USB, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino.
Our minimum order value is £50, but for small orders it may be cheaper to buy this product from our distributor partners: RS Components or Digi-Key.
-
RFID NFC USB-B1
£39.95Add to basketComplete Evaluation and Software Development Board for the RFID-B1 module (supporting ISO 14443A, MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®, NTAG2xx® card/tag types). This board is also suitable for use as a standalone OEM reader/writer product of these transponder types.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
RFID NFC OEM MICODE RS232 TURBO
£37.75Add to basketThe OEM MICODE RS232 TURBO reader is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI, DESFire® MIFARE Plus® cards and tags. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).
-
RFID NFC OEM MICODE USB TURBO
£37.95Add to basketThe OEM MICODE USB TURBO reader is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI, DESFire® MIFARE Plus® cards and tags. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
RFID MicroRWD HITAG2
£20.85Add to basketThe MicroRWD Hitag2 version is a complete reader and tag acceptance solution for Hitag 2 ® RF transponders. The solution only needs a 700uH antenna coil connected and 5 V DC supply to be a fully featured read/write system. Supports access of UID serial number when passwords are unknown. Typical power consumption 50mW (10mA@5V).
-
RFID MicroRWD QT
£20.45Add to basketThe MicroRWD QT (Quad-Tag) version is a complete 125kHz reader solution for Hitag 1, Hitag S256/S2048 (Plain Memory mode), Hitag 2 (Password mode), EM400X/4102 and MCRF200I/123 passive RFID transponder types.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):