Legacy
-
RFID A1
£14.95Add to basketA surface mount complete RFID reader module supporting Mifare Classic, Mifare Ultralight, Mifare EV1, NTAG2xx transponders. SPI or I2C interface. Connect a 3.3V power supply and an antenna (see our antenna range) to create a working RFID reader. Very fast and very low power. Supports multiple tags simultaneously in the field and stand alone operation as well as connected to a host controller operation. Add as a sub assembly component to your pcb to give RFID capability to your product.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
MicroRWD MIFARE
£23.99Add to basketThe MicroRWD MIFARE LP (Low Power) module is a complete read and write solution for 13.56 MHz MIFARE Classic® cards (1K, 4K and Ultralight® versions) and supports MIFARE® contactless operations to dual-interface cards such as MIFARE ProX®, Smart MX® (JCOP) and other types. DESfire® and MIFARE Plus® cards are supported for serial number acquisition only.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partner: here (RS Components)
-
MicroRWD HITAG2
£14.21Add to basketThe MicroRWD H2 version is a complete reader and tag acceptance solution for Hitag 2 ® RF transponders. The solution only needs a 700uH antenna coil connected and 5 V DC supply to be a fully featured read/write system. Supports access of UID serial number when passwords are unknown. Typical power consumption 50mW (10mA@5V).
-
MicroRWD MICODE
£25.03Add to basketThe MicroRWD MICODE module is a complete “contactless” read / write solution for 13.56 MHz MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®, ProX®, Smart MX®, JCOP), ICODE® SLI and ISO14443B (Calypso Rev2) cards and tags. DESfire®, MIFARE Plus® and ISO14443B Calypso cards are supported for serial number acquisition only.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
MicroRWD QT
£14.95Add to basketThe MicroRWD QT (Quad-Tag) version is a complete 125kHz reader solution for Hitag 1, Hitag S256/S2048 (Plain Memory mode), Hitag 2 (Password mode), EM400X/4102 and MCRF200I/123 passive RFID transponder types.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
MicroRWD QT LP SMT
£13.95Add to basketSurface mount version of 125 kHz RFID reader module supporting several transponder/tag types. NXP Hitag 1, Hitag S, Hitag 2, EM4001 / EM4102 and Microchip MCRF200/123 tag types.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
Hand held EM4102 reader
£104.24Add to basketHand held reader for instant convenient reading of bird tags and other EM4102 tags.
While stocks last.
-
OEM-MICODE-RS232
£34.44Add to basketThe OEM-MICODE-RS232 Reader Board is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI cards and tags. DESFire® and Mifare Plus® cards are supported for serial number acquisition only. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
OEM-MICODE-USB
£36.53Add to basketA Complete RFID read/write device supporting NFC transponders (NTAG2 fully supported, NTAG4 serial number read only). Also fully supports MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight. Supports DESFIRE serial number read only. Connected and powered by USB. Available also in white or black case with rubber feet for desktop use. (Please email sales@eccel.co.uk for pricing and to order cased version).
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):