-
Avian Datalogger System
From £310.00Select optionsThe Avian EM4xxx datalogger system is fully IP68 rated. It consists of 3 main elements: datalogger/battery unit, RFID unit, loop antennas.
Please select the required components in the Bundle Products tab to have the whole working system.
Available to pre-order for shipment on 5 July
-
Avian Datalogger/Battery Unit
£162.75Add to basketThe datalogger/battery unit contains the storage memory for the tag detections and a rechargeable lithium ion battery pack. This is charged by a 5V power supply (USB) and is connected by a mini USB connector. On the current pre-production trial units, the system is a fixed polling rate of 7 scans per second. Any tag detected will not be stored in memory again for a second to prevent too many “same event” storages. On future releases, polling time will be user configurable, as will the “same event” delay time for ignoring events within a user selectable time of one another.
Available to pre-order for shipment on 5 July
-
Avian Loop antenna 45/65/80 mm
£22.00 – £31.50Select optionsAvian Loop Antenna. Specially tuned loop antenna of 45/65/80mm internal diameter and 1.3m connecting cable. To connect directly to our Avian datalogger / reader products. Waterproof and toughened.
Available on 3 June
-
Avian RFID Unit
£126.00 – £157.50Select optionsThe RFID unit can be a single antenna or double antenna version. It is IP68 rated and comes with two connectors. One to the antenna(s) and one to the datalogger/battery unit. The unit contains a small amount of memory where 100 detections are stored. Once more than 100 detections occur, the data is transferred to the datalogger/battery unit where it is stored as a CSV file.
Available to pre-order for shipment on 5 July
-
Jalapeno Wireless UHF Reader (coming soon) available to pre-order now for shipment by 15 September 2019
£119.95Read moreAvailable after 15 September 2019
The RFID UHF Reader is an embedded module which can operate in both host connected and stand alone mode. It’s a compact UHF RFID reader/writer with USB, UART and Wi-Fi (Bluetooth LE coming soon) interfaces, one internal chip antenna for communication with UHF RFID passive tags and U.fl socket for an external antenna (ANT2). With max. 20 dBm power output it can achieve up to 2 meters reading range from the internal antenna and greater range when connected to the external antenna.
The RFID UHF Reader supports all ISO18000-6C (EPC Class1 Gen2) tags, as well as ETSI & FCC frequencies 840-960MHz.
Supply voltage range: 3.6 – 5.5 V
Interfaces: USB, UART TTL, Wi-Fi, WebSockets, MQTT, (Bluetooth LE coming soon). -
Pepper Wireless C1 UART
£27.95Add to basketThe RFID C1 UART is a very powerful, wireless (Wi-Fi now with Bluetooth to follow soon) and low cost full RFID/NFC read/write device with UART interface that can operate in both host connected and stand alone mode. Supports MIFARE® Classic® in 1K, 4K memory, ICODE, MIFARE Ultralight®, MIFARE DESFire® EV1/EV2, MIFARE Plus®.
-
Pepper Wireless C1 USB
£29.95Add to basketThe RFID C1 USB is a very powerful, wireless (Wi-Fi now with Bluetooth to follow soon) and low cost full RFID/NFC read/write device with USB interface that can operate in both host connected and stand alone mode. Supports MIFARE® Classic® in 1K, 4K memory, ICODE, MIFARE Ultralight®, MIFARE DESFire® EV1/EV2, MIFARE Plus®.
-
RFID B1
£11.25£13.07Add to basketA surface mount complete RFID reader module supporting MIFARE Classic®, MIFARE Ultralight®, MIFARE EV1®, NTAG2xx® transponders. Serial (UART) interface. Additional features provided are a comparator, DAC, PWM and digital I/O. Connect a 3.3V power supply and an antenna (see our antenna range) to create a working RFID reader. Very fast and very low power. Supports multiple tags simultaneously in the field and stand alone operation as well as connected to a host controller operation. Add as a sub assembly component to your pcb to give RFID capability to your product.
-
RFID A1
£11.25£13.07Add to basketA surface mount complete RFID reader module supporting Mifare Classic, Mifare Ultralight, Mifare EV1, NTAG2xx transponders. SPI or I2C interface. Connect a 3.3V power supply and an antenna (see our antenna range) to create a working RFID reader. Very fast and very low power. Supports multiple tags simultaneously in the field and stand alone operation as well as connected to a host controller operation. Add as a sub assembly component to your pcb to give RFID capability to your product.
-
MicroRWD MIFARE
£19.90Add to basketThe MicroRWD MIFARE LP (Low Power) module is a complete read and write solution for 13.56 MHz MIFARE Classic® cards (1K, 4K and Ultralight® versions) and supports MIFARE® contactless operations to dual-interface cards such as MIFARE ProX®, Smart MX® (JCOP) and other types. DESfire® and MIFARE Plus® cards are supported for serial number acquisition only.
-
MicroRWD HITAG2
£13.60Add to basketThe MicroRWD H2 version is a complete reader and tag acceptance solution for Hitag 2 ® RF transponders. The solution only needs a 700uH antenna coil connected and 5 V DC supply to be a fully featured read/write system. Supports access of UID serial number when passwords are unknown. Typical power consumption 50mW (10mA@5V)
-
MicroRWD MICODE
£20.95Add to basketThe MicroRWD MICODE module is a complete “contactless” read / write solution for 13.56 MHz MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®, ProX®, Smart MX®, JCOP), ICODE® SLI and ISO14443B (Calypso Rev2) cards and tags. DESfire®, MIFARE Plus® and ISO14443B Calypso cards are supported for serial number acquisition only.
-
MicroRWD QT
£13.60Add to basketThe MicroRWD QT (Quad-Tag) version is a complete 125kHz reader solution for Hitag 1, Hitag S256/S2048 (Plain Memory mode), Hitag 2 (Password mode), EM400X/4102 and MCRF200I/123 passive RFID transponder types.
-
Chilli UART-B1
£16.95Add to basketA low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K, MIFARE Classic® 4K, NTAG2xx®, MIFARE Ultralight®. Based on our RFID-B1 with additional integral antenna, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes.
-
Chilli USB-B1
£19.95Add to basketA low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K and MIFARE Classic® 4K, NTAG2xx®, Ultralight. Based on our RFID-B1 with additional integral antenna, USB interface (FTDI virtual COM port, micro USB connector), powered by USB, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino.
-
Chilli RS232-B1
£18.95Add to basketA low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K, MIFARE Classic® 4K, NTAG2xx®, MIFARE Ultralight®. Based on our RFID-B1 with additional integral antenna, RS232 interface, up to continuous 25V DC power connection, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino, Altium/CS footprints, PCB antenna designs.
Privacy Overview
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
You can adjust all of your cookie settings by navigating the tabs on the left hand side.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.