polling mode

View as:
  • Sale!
    RFID B1

    RFID B1

    £11.25 £13.07

    A surface mount complete RFID reader module supporting MIFARE Classic®, MIFARE Ultralight®, MIFARE EV1®, NTAG2xx® transponders. Serial (UART) interface. Additional features provided are a comparator, DAC, PWM and digital I/O. Connect a 3.3V power supply and an antenna (see our antenna range) to create a working RFID reader. Very fast and very low power. Supports multiple tags simultaneously in the field and stand alone operation as well as connected to a host controller operation. Add as a sub assembly component to your pcb to give RFID capability to your product.

    Add to basket
    Compare
  • Chilli UART-B1

    £16.95

    A low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K, MIFARE Classic® 4K, NTAG2xx®, MIFARE Ultralight®. Based on our RFID-B1 with additional integral antenna, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes.

    Add to basket
    Compare
  • Chilli USB-B1

    £19.95

    A low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K and MIFARE Classic® 4K, NTAG2xx®, Ultralight. Based on our RFID-B1 with additional integral antenna, USB interface (FTDI virtual COM port, micro USB connector), powered by USB, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino.

    Add to basket
    Compare
  • Chilli RS232-B1

    £18.95

    A low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K, MIFARE Classic® 4K, NTAG2xx®, MIFARE Ultralight®. Based on our RFID-B1 with additional integral antenna, RS232 interface, up to continuous 25V DC power connection, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino, Altium/CS footprints, PCB antenna designs.

    Add to basket
    Compare
  • UART-B1

    £13.60

    *LIMITED STOCK ITEM* – this version has no LED to indicate a tag presence in the field.

    A low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K, MIFARE Classic® 4K, NTAG2xx®, MIFARE Ultralight®. Based on our RFID-B1 with additional integral antenna, mounting holes and flexible plated connection holes. The difference

    Add to basket
    Compare
  • A1/B1 Extension Board

    £1.84

    The A1/B1 EB v2.0 is an Extension Board (EB) for our RFID modules: the RFID A1 and RFID B1. The user can quickly connect our RFID modules to his device and check functionality and compatibility without wasting time in antenna design and tuning. The A1/B1 EB is simply a board with a built-in PCB antenna where the user can solder our RFID modules and test them. The read range with MIFARE Classic 1K ISO card is about 50 mm. All available pins of both modules are placed on the board with descriptions. There is also LED1 (green) which indicates a tag presence in the antenna field.

    The board does NOT come with any RFID-A1 or RFID-B1 module fitted. The user must purchase these separately and attach the desired module(s) to the A1/B1 EB by soldering.

    Add to basket
    Compare
  • Sale!
    RWD QT SMT Baseboard

    RWD QT SMT Baseboard

    £11.95 £15.95

    The RWD QT SMT Baseboard is a demonstration, evaluation and development board for the RWD-QT-SMT module. It is a complete reader and tag acceptance solution for passive RF transponders. The board is powered from the USB connection and, with the addition to it of a RWD-QT-LP-SMT, is a fully featured 125KHz RFID read/write system. The RWD module provides internal EEPROM memory for holding a list of authorised identity codes and system configuration parameters, a manual override switch facility and has LED drives to give visual indication of acceptance. The RWD also has a serial UART interface that allows a host system to communicate with it as the user requires, so that system features can be customised, configurations changed and tag read/write data handled by the host system. The board does NOT come with a RWD-QT-LP-SMT module, this must be purchased separately.

    Add to basket
    Compare

Showing all 7 results