RFID NFC Chilli RS232-B1

A low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K, MIFARE Classic® 4K, NTAG2xx®, MIFARE Ultralight®. Based on our RFID-B1 with additional integral antenna, RS232 interface, up to continuous 25V DC power connection, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino, Altium/CS footprints, PCB antenna designs.

Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: Digi-Key, RS Components or TME:

Availability:

41 in stock (can be backordered)

Compare

The Chilli RS232-B1 v2 is a low cost full RFID/NFC read/write device with RS232 interface that can operate in “host” connected mode or “stand-alone” mode. Supports MIFARE Classic® 1K, MIFARE Classic® 4K, NTAG2xx® and MIFARE Ultralight®. Additionally, you can read serial numbers from MIFARE Plus®, MIFARE® DESFire® and any transponder compatible with the ISO14443A standard. The RS232-B1 is based on our RFID-B1 module but is equipped with an additional integral antenna, an LED for tag in the field indication/ interrupt, mounting holes and flexible plated connection holes.

The Chilli RS232-B1 is an ideal choice if the user wishes to add RFID capability to their design quickly and easily. This device enables high performance RFID solutions to be developed without the requirement of any RFID expert knowledge on the part of the user. This applies ideally for designs based on connection to a host microcontroller.

Furthermore, a wide range of peripherals is available on the module, such as a comparator, DAC/PWM and digital IO. These can be configured and accessed by specific commands and control registers.

The interface protocol description can be found in the RFID B1 user manual.

Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: Digi-Key, RS Components or TME:

DigiKey Logo small 1 rs 2 tme 3

PARAMETERS

Frequency

HF

Interface

RS232

RFID Tag Standard

MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Classic® Mini, MIFARE Ultralight®, NTAG2xx®

Supply voltage

4.5-25V

DATASHEET

pdf icon 4USER MANUAL zip icon 5STEP FILE pdf icon 4RFID B1 USER MANUAL

 

DOWNLOADS

SOFTWARE & TOOLS:

zip icon 7B1 Client v1.6

zip icon 7B1 Stand-Alone Configurator v1.0

zip icon 7RFID Linux Tool: Linux command utility

FREE LIBRARIES & EXAMPLES:

zip icon 7C# library zip icon 7C Library zip icon 7C# GUI project zip icon 7Java library zip icon 7Java example
zip icon 7Arduino library pdf icon 16Arduino Installation manual

CE DECLARATION:

pdf icon 17CE

You may also like…