The OEM boards are based on the proven RWD-MICODE (MIFARE®, ICODE®) module design with components laid out inside a PCB track antenna and they function in exactly the same way as the module with an antenna fitted. The design incorporates power supply filtering to ensure optimum performance, antenna-trimming capacitor to adjust tuning for different environments and LEDs for visual indication of card acceptance. The J2 connector also allows the OEM-MICODE board to be reprogrammed with custom firmware.
The OEM-NFC-MIFARE-RS232 Reader boards are complete, embedded “Plug-and-Go” RFID read/writers with on-board PCB track antenna, LEDs and RS232 or USB host interfaces. The OEM Reader boards just need a 5 V supply to be fully featured RFID systems (the USB interface version is powered directly from the USB bus).
The OEM-MIFARE board fully supports MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and contactless read/write to MIFARE ProX® and SmartMX® cards and tags. DESFire® and MIFARE Plus® cards are supported for serial number acquisition only.
The OEM-MICODE-RS232 (MIFARE® / ICODE® / ISO14443B) board fully supports MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® (as above), ICODE SLI® and ISO14443B Calypso cards and tags. DESFire®, MIFARE Plus® and ISO14443B Calypso cards are supported for serial number acquisition only.
The OEM-NFC board fully supports NFC Type 2 and 4 cards and tags (including ISO14443A MIFARE®, MIFARE Ultralight®, NTAG2xx® etc). DESFire® and MIFARE Plus® cards are supported for serial number acquisition only.
