RFID NFC OEM-MICODE-RS232

The OEM-MICODE-RS232 Reader Board is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI cards and tags. DESFire® and Mifare Plus® cards are supported for serial number acquisition only. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).

Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

Availability:

98 in stock (can be backordered)

Compare
The OEM-MICODE-RS232 Reader Board is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI cards and tags. DESFire® and Mifare Plus® cards are supported for serial number acquisition only. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).

The OEM boards are based on the proven RWD-MICODE (MIFARE®, ICODE®) module design with components laid out inside a PCB track antenna and they function in exactly the same way as the module with an antenna fitted. The design incorporates power supply filtering to ensure optimum performance, antenna-trimming capacitor to adjust tuning for different environments and LEDs for visual indication of card acceptance. The J2 connector also allows the OEM-MICODE board to be reprogrammed with custom firmware.

The OEM-NFC-MIFARE-RS232 Reader boards are complete, embedded “Plug-and-Go” RFID read/writers with on-board PCB track antenna, LEDs and RS232 or USB host interfaces. The OEM Reader boards just need a 5 V supply to be fully featured RFID systems (the USB interface version is powered directly from the USB bus).

The OEM-MIFARE board fully supports MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and contactless read/write to MIFARE ProX® and SmartMX® cards and tags. DESFire® and MIFARE Plus® cards are supported for serial number acquisition only.

The OEM-MICODE-RS232 (MIFARE® / ICODE® / ISO14443B) board fully supports MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® (as above), ICODE SLI® and ISO14443B Calypso cards and tags. DESFire®, MIFARE Plus® and ISO14443B Calypso cards are supported for serial number acquisition only.

The OEM-NFC board fully supports NFC Type 2 and 4 cards and tags (including ISO14443A MIFARE®, MIFARE Ultralight®, NTAG2xx® etc). DESFire® and MIFARE Plus® cards are supported for serial number acquisition only.

PARAMETERS

Frequency

HF

Interface

RS232

RFID Tag Standard

ICODE SLI®, MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®

Supply voltage

5V

Firmware

090811

DATASHEET

pdf iconDATASHEET

 

DOWNLOADS

SOFTWARE & TOOLS:

zip icon 1Micro RWD MFIC 1.1

CE DECLARATION:

pdf icon 2CE

You may also like…