View as:
  • MicroRWD QT

    £14.95

    The MicroRWD QT (Quad-Tag) version is a complete 125kHz reader solution for Hitag 1, Hitag S256/S2048 (Plain Memory mode), Hitag 2 (Password mode), EM400X/4102 and MCRF200I/123 passive RFID transponder types.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • Chilli UART-B1

    £18.95

    A low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K, MIFARE Classic® 4K, NTAG2xx®, MIFARE Ultralight®. Based on our RFID-B1 with additional integral antenna, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • Chilli USB-B1

    £21.45

    A low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K and MIFARE Classic® 4K, NTAG2xx®, Ultralight. Based on our RFID-B1 with additional integral antenna, USB interface (FTDI virtual COM port, micro USB connector), powered by USB, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • Chilli RS232-B1

    £20.45

    A low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K, MIFARE Classic® 4K, NTAG2xx®, MIFARE Ultralight®. Based on our RFID-B1 with additional integral antenna, RS232 interface, up to continuous 25V DC power connection, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino, Altium/CS footprints, PCB antenna designs.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • RaspberryPi-B1

    £24.00

    The RaspberryPi-B1 module is an expansion of the RFID B1 module – the second in an evolving family of 13.56 MHz sub assemblies from Eccel Technology Ltd (IB Technology). The product is designed with both embedded applications and computing / PLC platforms in mind. This product is an ideal design choice if the user wishes to add RFID capability to their design quickly and without requiring extensive RFID and embedded software expertise and time. An on board low power ARM microcontroller handles the RFID configuration setup and provides the user with a powerful yet simple command interface to facilitate fast and easy read/write access to the memory and features of the various transponders supported by this module. This device is designed to be compatible with the Raspberry Pi Hat standard.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partner: here (RS Components)

     

    Add to basket
  • USB-B1

    £26.08

    Complete Evaluation and Software Development Board for the RFID-B1 module (supporting ISO 14443A, MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®, NTAG2xx® card/tag types). This board is also suitable for use as a standalone OEM reader/writer product of these transponder types.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • MicroRWD QT LP SMT

    £13.95

    Surface mount version of 125 kHz RFID reader module supporting several transponder/tag types. NXP Hitag 1, Hitag S, Hitag 2, EM4001 / EM4102 and Microchip MCRF200/123 tag types.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • RFID-ANT1356-50×50-300

    £9.95

    One of a family of PCB antennas designed for use with our RFID-A1 and RFID-B1 RFID modules. Antenna dimensions 50mm x 50mm. PCB dimensions 60mm x 60mm. Supplied with mating PCB connector for rapid connection to users circuit. Cable length of 300mm.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • MUX ANT1356-80X80-300

    £12.20

    One of a family of PCB antennas designed for use with our Pepper C1 MUX modules. Antenna dimensions 80mm x 80mm. PCB dimensions 90mm x 90mm. Supplied with mating PCB connector for rapid connection to users circuit. Cable length of 300mm.

    Add to basket
  • MUX ANT1356-80X80-800

    £13.95

    One of a family of PCB antennas designed for use with our Pepper C1 MUX modules. Antenna dimensions 80mm x 80mm. PCB dimensions 90mm x 90mm. Supplied with mating PCB connector for rapid connection to users circuit. Cable length of 800mm.

    Add to basket
  • RFID-ANT1356-25X25-300

    £8.45

    One of a family of PCB antennas designed for use with our RFID-A1 and RFID-B1 RFID modules. Antenna dimensions 25mm x 25mm. PCB dimensions 34mm x 34mm. Supplied with mating PCB connector for rapid connection to users circuit. Cable length of 300mm.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • RFID-ANT1356-80X80-300

    £12.20

    One of a family of PCB antennas designed for use with our standard RFID readers (except the Pepper C1 MUX readers). Antenna dimensions 80mm x 80mm. PCB dimensions 90mm x 90mm. Supplied with mating PCB connector for rapid connection to users circuit. Cable length of 300mm.

    Add to basket
  • RFID-ANT1356-80X80-800

    £13.95

    One of a family of PCB antennas designed for use with our standard RFID readers (except the Pepper C1 MUX readers). Antenna dimensions 80mm x 80mm. PCB dimensions 90mm x 90mm. Supplied with mating PCB connector for rapid connection to users circuit. Cable length of 800mm.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partner: here (RS Components)

    Add to basket
  • RFID-ANT1356-25X25-800

    £9.45

    One of a family of PCB antennas designed for use with our RFID-A1 and RFID-B1 RFID modules. Antenna dimensions 25mm x 25mm. PCB dimensions 34mm x 34mm. Supplied with mating PCB connector for rapid connection to users circuit. Cable length of 800mm.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • RFID-ANT1356-50×50-800

    £10.95

    One of a family of PCB antennas designed for use with our RFID-A1 and RFID-B1 RFID modules. Antenna dimensions 50mm x 50mm. PCB dimensions 60mm x 60mm. Supplied with mating PCB connector for rapid connection to users circuit. Cable length of 800mm.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):

    Add to basket
  • A1/B1 Extension Board

    £1.94

    The A1/B1 EB v2.0 is an Extension Board (EB) for our RFID modules: the RFID A1 and RFID B1. The user can quickly connect our RFID modules to his device and check functionality and compatibility without wasting time in antenna design and tuning. The A1/B1 EB is simply a board with a built-in PCB antenna where the user can solder our RFID modules and test them. The read range with MIFARE Classic 1K ISO card is about 50 mm. All available pins of both modules are placed on the board with descriptions. There is also LED1 (green) which indicates a tag presence in the antenna field.

    The board does NOT come with any RFID-A1 or RFID-B1 module fitted. The user must purchase these separately and attach the desired module(s) to the A1/B1 EB by soldering.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partner: here (RS Components)

    Add to basket

Showing 33–48 of 117 results

×