-
OEM-MICODE-RS232
£24.95Add to basketThe OEM-MICODE-RS232 Reader Board is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI cards and tags. DESFire® and Mifare Plus® cards are supported for serial number acquisition only. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).
-
OEM-MICODE-USB
£25.95Add to basketA Complete RFID read/write device supporting NFC transponders (NTAG2 fully supported, NTAG4 serial number read only). Also fully supports MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight. Supports DESFIRE serial number read only. Connected and powered by USB. Available also in white or black case with rubber feet for desktop use. (Please email sales@eccel.co.uk for pricing and to order cased version).
-
OEM-MICODE-USB in Black Case
£31.95Add to basketThe OEM USB reader in a custom made black case (99mm x 61mm x 25mm). With light pipes for viewing the LEDs and rubber feet for desktop standing.
-
OEM-MICODE-USB in White Case
£29.95Add to basketThe OEM USB reader in a custom made black case (99mm x 61mm x 25mm). With light pipes for viewing the LEDs and rubber feet for desktop standing.
-
Reader Black Case
£5.95Add to basketA case made in ABS black plastic to fit Chilli reader products and OEM-Micode products
-
Reader White Case
£5.95Add to basketA case made in ABS white plastic to fit Chilli reader products and OEM-Micode products
-
RFID Custom tags
Read moreApart from our broad offer of standard tags, we offer our customers tags upon their special, tailored-made request. Do not hesitate to contact us at sales@eccel.co.uk or give us a call +44(0) 1296821358
-
RFID-A4 Ferrite Sheet
£3.95Add to basketA4 sized (300mm x 200mm) 0.5mm thick self-adhesive ferrite sheeting.
-
ANT125K-20 (20mm)
£3.95Add to basket125KHz antenna for RFID applications. External coil diameter of 20 mm (Inner Diameter 10mm). Flat wound of thickness 2mm. For easy adhesion to a surface. For use in applications with tags that use a small antenna such as keyfobs. Inductance 750mH +/- 5%. DC Resistance 7.5 Ohms +/- 5%.
-
ANT125K-45 (45mm)
£4.45Add to basket125 kHz antenna for RFID applications. External coil diameter of 49 mm (Inner Diameter 45 mm). Flat wound of thickness 2mm. For easy adhesion to a surface. For use in applications with tags that use a small antenna such as keyfobs. Inductance 750mH +/- 5%. DC Resistance 7.5 Ohms +/- 5%.
-
ANT125K-70 (70mm)
£4.95Add to basket125KHz antenna for RFID applications. External coil diameter of 75 mm (Inner Diameter 70 mm). Flat wound of thickness 2mm. For easy adhesion to a surface. For use in applications with tags that use a small antenna such as keyfobs. Inductance 750mH +/- 5%. DC Resistance 7.5 Ohms +/- 5%.
-
RFID-ANT1356M-(65mm)
£5.95Add to basket1 micro Henry antenna coil assembly (6.5cm diameter) designed to be used with 13.56MHz Micro RWD modules (Mifare and ICODE etc). Range with ISO card size transponders/tags up to 10cm.
Other sizes of antenna coil are available or we can design and manufacture custom sizes and shapes. Please contact us for details. -
RWD QT SMT Baseboard
£18.95Add to basketThe RWD QT SMT Baseboard is a demonstration, evaluation and development board for the RWD-QT-SMT module. It is a complete reader and tag acceptance solution for passive RF transponders. The board is powered from the USB connection and, with the addition to it of a RWD-QT-LP-SMT, is a fully featured 125KHz RFID read/write system. The RWD module provides internal EEPROM memory for holding a list of authorised identity codes and system configuration parameters, a manual override switch facility and has LED drives to give visual indication of acceptance. The RWD also has a serial UART interface that allows a host system to communicate with it as the user requires, so that system features can be customised, configurations changed and tag read/write data handled by the host system. The board does NOT come with a RWD-QT-LP-SMT module, this must be purchased separately.
-
RWD SDK
£39.95Add to basketComplete Evaluation and Software Development Kit (SDK) for main 13.56MHz and 125kHz Micro RWD module types (supporting ISO 15693 ICODE SLI, ISO 14443A, MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight, Hitag 1, Hitag S256, Hitag S2048, Hitag 2, EM4001, EM4102 and MCRF200/123 card/tag types).
-
RWD-RDP-125KHz
£99.00Add to basketFully developed reference designs for 125kHz, identical to RWD module designs, give quick-time-to-market solutions for volume applications. All Chip set solutions are supported by detailed schematic diagrams, Bill-of-Materials, PCB layouts, Gerber files, application notes and technical support.
-
RWD-RDP-1356MHz
£99.00Add to basketFully developed reference designs for 13.56MHz, identical to RWD module designs, give quick -time-to-market solutions for volume applications. All Chip set solutions are supported by detailed schematic diagrams, Bill-of-Materials, PCB layouts, Gerber files, application notes and technical support.
