RFID Readers/Modules
RFID NFC B1 EA USB (External Antenna)
£25.35Add to basketA low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K and MIFARE Classic® 4K, NTAG2xx®, Ultralight. Based on our RFID-B1 with additional socket for an external antenna, USB interface (FTDI virtual COM port, micro USB connector), powered by USB, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino.
RFID NFC USB-B1
£41.15Add to basketComplete Evaluation and Software Development Board for the RFID-B1 module (supporting ISO 14443A, MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®, NTAG2xx® card/tag types). This board is also suitable for use as a standalone OEM reader/writer product of these transponder types.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
RFID NFC OEM MICODE RS232 TURBO
£38.90Add to basketThe OEM MICODE RS232 TURBO reader is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI, DESFire® MIFARE Plus® cards and tags. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).
RFID NFC OEM MICODE USB TURBO
£39.10Add to basketThe OEM MICODE USB TURBO reader is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI, DESFire® MIFARE Plus® cards and tags. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
RFID MicroRWD HITAG2
£21.05Add to basketThe MicroRWD Hitag2 version is a complete reader and tag acceptance solution for Hitag 2 ® RF transponders. The solution only needs a 700uH antenna coil connected and 5 V DC supply to be a fully featured read/write system. Supports access of UID serial number when passwords are unknown. Typical power consumption 50mW (10mA@5V).
RFID MicroRWD QT
£21.05Add to basketThe MicroRWD QT (Quad-Tag) version is a complete 125kHz reader solution for Hitag 1, Hitag S256/S2048 (Plain Memory mode), Hitag 2 (Password mode), EM400X/4102 and MCRF200I/123 passive RFID transponder types.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
RFID NFC MicroRWD MICODE
£35.70Read morePlease note: this product has now been discontinued. Please contact sales@eccel.co.uk for further information. Alternatively, please see part number 000596 which is our latest version of this product.
The MicroRWD MICODE module is a complete “contactless” read / write solution for 13.56 MHz MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®, ProX®, Smart MX®, JCOP), ICODE® SLI and ISO14443B (Calypso Rev2) cards and tags. DESFire®, MIFARE Plus® and ISO14443B Calypso cards are supported for serial number acquisition only.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
RFID NFC MicroRWD MIFARE
£31.95Read morePlease note: this product has now been discontinued. Please contact sales@eccel.co.uk for further information. Alternatively, please see part number 000596 which is our latest version of this product.
The MicroRWD MIFARE LP (Low Power) module is a complete read and write solution for 13.56 MHz MIFARE Classic® cards (1K, 4K and Ultralight® versions) and supports MIFARE® contactless operations to dual-interface cards such as MIFARE ProX®, Smart MX® (JCOP) and other types. DESfire® and MIFARE Plus® cards are supported for serial number acquisition only.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partner: here (RS Components)
RFID NFC OEM-MICODE-RS232
£37.85Read moreThe OEM-MICODE-RS232 Reader Board is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI cards and tags. DESFire® and Mifare Plus® cards are supported for serial number acquisition only. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
RFID NFC OEM-MICODE-USB
£41.05Add to basketA Complete RFID read/write device supporting NFC transponders (NTAG2 fully supported, NTAG4 serial number read only). Also fully supports MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight. Supports DESFire serial number read only. Connected and powered by USB. (Please email sales@eccel.co.uk for pricing and to order cased version).
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
