logo
sales@eccel.co.uk

RFID Readers/Modules

  • RFID B1 EA USB

    RFID B1 EA USB (External Antenna)

    £25.35

    RFID B1 EA USB is a low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K and MIFARE Classic® 4K, NTAG2xx®, Ultralight. Based on our RFID-B1 with additional socket for an external antenna, USB interface (FTDI virtual COM port, micro USB connector), powered by USB, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino.

    Add to basket
  • USB-B1 RFID USB Reader

    RFID NFC USB-B1

    £41.15

    Complete Evaluation and Software Development Board for the RFID-B1 module (supporting ISO 14443A, MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®, NTAG2xx® card/tag types). This board is also suitable for use as a standalone OEM reader/writer product of these transponder types.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
    Add to basket
  • OEM MICODE RS232 TURBO

    RFID NFC OEM MICODE RS232 TURBO

    £38.90

    The OEM MICODE RS232 TURBO reader is a complete Read/Write system for ISO/IEC 14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO/IEC 15693 ICODE® SLI, DESFire® MIFARE Plus® cards and tags. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).

    Add to basket
  • OEM MICODE USB TURBO

    RFID NFC OEM MICODE USB TURBO

    £39.10

    The OEM MICODE USB TURBO reader is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI, DESFire® MIFARE Plus® cards and tags. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
    Add to basket
  • MicroRWD Hitag2 MicroRWD QT

    RFID MicroRWD HITAG2

    £21.05

    The MicroRWD Hitag2 version is a complete reader and tag acceptance solution for Hitag 2 ® RF transponders. The solution only needs a 700uH antenna coil connected and 5 V DC supply to be a fully featured read/write system. Supports access of UID serial number when passwords are unknown. Typical power consumption 50mW (10mA@5V).

    Add to basket
  • MicroRWD Hitag2 MicroRWD QT

    RFID MicroRWD QT

    £21.05

    The MicroRWD QT (Quad-Tag) version is a complete 125kHz reader solution for Hitag 1, Hitag S256/S2048 (Plain Memory mode), Hitag 2 (Password mode), EM400X/4102 and MCRF200I/123 passive RFID transponder types.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
    Add to basket
  • MicroRWD NFC MicroRWD MIFARE MicroRWD MICODE

    RFID NFC MicroRWD MICODE

    £35.70

    Please note: this product has now been discontinued. Please contact sales@eccel.co.uk for further information. Alternatively, please see part number 000596 which is our latest version of this product.

    The MicroRWD MICODE module is a complete “contactless” read / write solution for 13.56 MHz MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®, ProX®, Smart MX®, JCOP), ICODE® SLI and ISO14443B (Calypso Rev2) cards and tags. DESFire®, MIFARE Plus® and ISO14443B Calypso cards are supported for serial number acquisition only.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
    Read more
  • MicroRWD NFC MicroRWD MIFARE MicroRWD MICODE

    RFID NFC MicroRWD MIFARE

    £31.95

    Please note: this product has now been discontinued. Please contact sales@eccel.co.uk for further information. Alternatively, please see part number 000596 which is our latest version of this product.

    The MicroRWD MIFARE LP (Low Power) module is a complete read and write solution for 13.56 MHz MIFARE Classic® cards (1K, 4K and Ultralight® versions) and supports MIFARE® contactless operations to dual-interface cards such as MIFARE ProX®, Smart MX® (JCOP) and other types. DESfire® and MIFARE Plus® cards are supported for serial number acquisition only.

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partner: here (RS Components)
    Read more
  • OEM-MICODE-RS232

    RFID NFC OEM-MICODE-RS232

    £37.85

    The OEM-MICODE-RS232 Reader Board is a complete Read/Write system for ISO14443A MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight® and ISO15693 ICODE® SLI cards and tags. DESFire® and Mifare Plus® cards are supported for serial number acquisition only. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 V supply, USB version uses USB bus for power supply).

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
    Read more
  • OEM-MICODE-USB

    RFID NFC OEM-MICODE-USB

    £41.05

    The OEM-MICODE-USB is a Complete RFID read/write device supporting NFC transponders (NTAG2 fully supported, NTAG4 serial number read only). Also fully supports MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight. Supports DESFire serial number read only. Connected and powered by USB. (Please email sales@eccel.co.uk for pricing and to order cased version).

    Our minimum order value is £50 but for small orders it  may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
    Add to basket
1. Do these readers have CE and FCC certification?
Yes, all our RFID readers and modules are tested and certified to meet CE standards. The latest readers from the Pepper C1 family have some family members with full modular FCC approval certification too.
2. How are embedded modules integrated?
Our modules can be easily integrated into your hardware via UART, USB, Ethernet, RS232, RS485, SPI or I2C interfaces. There are also many wireless protocols available in the Pepper C1 family like TCP Server, TCP Client, REST API, MQTT, Web Socket and BR/EDR + LE
3. What is the typical read range and what does the reading range depend on?
LF (125 kHz) readers typically have a range of several centimeters. For HF (13.56 MHz) readers, the typical reading range for the B1 series readers is a maximum of 7 cm. For C1 series readers, it's a maximum of 12 cm, and for C2 series readers, it can reach up to 20 cm. For our UHF reader, the reading range is up to 15m. The read range is influenced by the antenna size, tag type and orientation, reader power output, environmental conditions, and surrounding materials such as metal or liquid.
4. What hardware interfaces are available?
Depending on the model, readers offer interfaces such as USB, serial UART (TTL), RS232, RS485, Wiegand, Ethernet, SPI, or I²C for flexible system integration.
5. What reader should I select for my project?
Here's a quick guide to choosing the right reader family. You need to answer a few basic questions: What reading range do I need? Less than 10 cm – all will work. Above 10 cm – Pepper C1 or Pepper C2, up to 20cm – Pepper C2. Do I need wireless connectivity? Yes – Pepper C1. No – all, including Pepper C1. Do I need to detect tags some distance away the reader's mounting location? Yes – look for readers with the EA (External Antenna) suffix or 1 of our PCBA mounting modules . No – all will work. Do I need multiple active zones for reading tags? Yes – choose Pepper C1 MUX. Do I need low power consumption? Choose RFID B1 module, Pepper C1 module, or Pepper C2 module – these are SMT versions of standard readers.
6. Can multiple tags be read simultaneously?
Yes, depending on the model and tag type, our readers can perform anti-collision operations to identify multiple tags at once. How many? Up to 15 tags in case of small ICODE tags, the limiting factor is enough emitted power to power up multiple tags.
7. Do the modules support custom firmware or commands?
All modules have a fixed command set, but we provide custom firmware development upon request.