RFID
-
RFID NFC Chilli RS232-B1
£36.50Read moreA low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K, MIFARE Classic® 4K, NTAG2xx®, MIFARE Ultralight®. Based on our RFID-B1 with additional integral antenna, RS232 interface, up to continuous 25V DC power connection, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino, Altium/CS footprints, PCB antenna designs.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: Digi-Key, RS Components or TME:
-
RFID NFC Chilli UART-B1
£35.50Add to basketA low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K, MIFARE Classic® 4K, NTAG2xx®, MIFARE Ultralight®. Based on our RFID-B1 with additional integral antenna, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
RFID NFC Chilli USB-B1
£37.30Add to basketA low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K and MIFARE Classic® 4K, NTAG2xx®, Ultralight. Based on our RFID-B1 with additional integral antenna, USB interface (FTDI virtual COM port, micro USB connector), powered by USB, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: RS Components – [click here], Digi-Key – [click here] or TME – [click here]:
-
RFID NFC A1
£23.50Add to basketA surface mount complete RFID reader module supporting Mifare Classic, Mifare Ultralight, Mifare EV1, NTAG2xx transponders. SPI or I2C interface. Connect a 3.3V power supply and an antenna (see our antenna range) to create a working RFID reader. Very fast and very low power. Supports multiple tags simultaneously in the field and stand alone operation as well as connected to a host controller operation. Add as a sub assembly component to your pcb to give RFID capability to your product.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
RFID NFC B1
£23.50Read moreA surface mount complete RFID reader module supporting MIFARE Classic®, MIFARE Ultralight®, MIFARE EV1®, NTAG2xx® transponders. Serial (UART) interface. Additional features provided are a comparator, DAC, PWM and digital I/O. Connect a 3.3V power supply and an antenna (see our antenna range) to create a working RFID reader. Very fast and very low power. Supports multiple tags simultaneously in the field and stand alone operation as well as connected to a host controller operation. Add as a sub assembly component to your pcb to give RFID capability to your product.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: RS Components – [click here], Digi-Key – [click here] or TME – [click here]:
-
RFID NFC B1 EA USB (External Antenna)
£22.55Read moreA low cost full RFID/NFC read/write device that can operate in “host” connected mode or “stand alone” mode. Supports MIFARE Classic® 1K and MIFARE Classic® 4K, NTAG2xx®, Ultralight. Based on our RFID-B1 with additional socket for an external antenna, USB interface (FTDI virtual COM port, micro USB connector), powered by USB, LED for card in the field indication/ interrupt, mounting holes and flexible plated connection holes. Free software libraries for C, C#, Java, Linux, Arduino.
Our minimum order value is £50, but for small orders it may be cheaper to buy this product from our distributor partners: RS Components or Digi-Key.
-
RFID NFC MicroRWD MICODE
£35.70Read moreThe MicroRWD MICODE module is a complete “contactless” read / write solution for 13.56 MHz MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®, ProX®, Smart MX®, JCOP), ICODE® SLI and ISO14443B (Calypso Rev2) cards and tags. DESFire®, MIFARE Plus® and ISO14443B Calypso cards are supported for serial number acquisition only.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
RFID MicroRWD QT LP SMT
£16.45Add to basketSurface mount version of 125 kHz RFID reader module supporting several transponder/tag types. NXP Hitag 1, Hitag S, Hitag 2, EM4001 / EM4102 and Microchip MCRF200/123 tag types.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
RFID RWD QT ESD (Industrial)
£26.95Add to basketIndustrial version of 125 kHz RFID reader module supporting several transponder/tag types. NXP Hitag1, Hitag S256, Hitag S2048, Hitag2, EM4001 / EM4102 and Microchip MCRF200/123 tag types.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
-
RFID NFC A1/B1 Extension Board
£4.50Add to basketThe A1/B1 EB v2.0 is an Extension Board (EB) for our RFID modules: the RFID A1 and RFID B1. The user can quickly connect our RFID modules to his device and check functionality and compatibility without wasting time in antenna design and tuning. The A1/B1 EB is simply a board with a built-in PCB antenna where the user can solder our RFID modules and test them. The read range with MIFARE Classic 1K ISO card is about 50 mm. All available pins of both modules are placed on the board with descriptions. There is also LED1 (green) which indicates a tag presence in the antenna field.
The board does NOT come with any RFID-A1 or RFID-B1 module fitted. The user must purchase these separately and attach the desired module(s) to the A1/B1 EB by soldering.
Our minimum order value is £50 but for small orders it may be cheaper to buy this product from our distributor partner: here (RS Components)
-
RFID RWD QT SMT Baseboard
£32.95Add to basketThe RWD QT SMT Baseboard is a demonstration, evaluation and development board for the RWD-QT-SMT module. It is a complete reader and tag acceptance solution for passive RF transponders. The board is powered from the USB connection and, with the addition to it of a RWD-QT-LP-SMT, is a fully featured 125KHz RFID read/write system. The RWD module provides internal EEPROM memory for holding a list of authorised identity codes and system configuration parameters, a manual override switch facility and has LED drives to give visual indication of acceptance. The RWD also has a serial UART interface that allows a host system to communicate with it as the user requires, so that system features can be customised, configurations changed and tag read/write data handled by the host system. The board does NOT come with a RWD-QT-LP-SMT module, this must be purchased separately.
Our minimum order value is £200 but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (TME):
While stocks last.
-
RFID NFC MUX ANT1356-80×80-300
£10.95Add to basketOne of a family of PCB antennas designed for use with our Pepper C1 MUX modules. Antenna dimensions 80mm x 80mm. PCB dimensions 90mm x 90mm. Cable length of 300mm with 3-pin connector.
Our minimum order value is £50, but for small orders it may be cheaper to buy this product from our distributor partners: here (RS Components) or here (Digi-Key):